Offshore warning light special designed for use on buoys and floats with white power LED`s. The flash character is programmable for any character. Standard character is morse code U.
HUB500 can be delivered with client specified cables and connectors.
Visibility is 10 km in clear dark night. All models have photocell day/night switch.
Power consumption 8 watt.

HUB500-12
12-15VDC input

HUB500-24
24-30VDC input

HUB500-12-GPS
12-15VDC input with onboard GPS flash synchronization.

HUB500-24-GPS
24-30VDC input with onboard GPS flash synchronization.

DWF-300-SW is a special designed warning light for submerged applications. The warning light is equipped with an internal water pressure switch that shuts OFF the warning light when submerged in water, and switches automatic ON the warning light when in air. The warning light has an automatic day/night ON/OFF photocell switch. During storage and when not in use the warning light is switched OFF by placing the red magnetic cap over the top of the light. The warning light is powered from 2 pcs. Lithium C-cell 3,6V battery.

Weight: 1kg
Body: Anodized aluminium EN AW 6082-T6.
Lens: PMMA.
Flash source: Side emitting white LED.
Flash character: 20 double flash/min.
Battery: 2 Pcs. 3,6V Lithiun C-cell battery.
Operational time: 170 hours continuous flashing.
Daylight photocell: Automatic day/night photocell switch.
Visibility: 2-3 NM.
Max. water pressure: 600 bar.
Water pressure switch: Shut OFF warning light at 1,6 bar water pressure.
Temperature range: -40°C to +60°C
Lenght without OFF cap: 300mm.
Min. diameter: 44mm.
Max. diameter: 49mm.
Weight included battery: 1 Kg.

DWF-200-SW is a special designed warning light for submerged applications. The warning light is equipped with an internal water pressure switch that shuts OFF the warning light when submerged in water, and switches automatic ON the warning light when in air. The warning light has an automatic day/night ON/OFF photocell switch. During storage and when not in use the warning light is switched OFF by placing the red magnetic cap over the top of the light. The warning light is powered from a single C-cell dry alkaline 1,5V battery.

Body: Anodized aluminium EN AW 6082-T6.
Lens: PMMA.
Flash source: Side emitting white LED.
Flash character: 20 double flash/min.
Battery: 1 Pcs. 1,5V C-cell (LR14) dry alkaline battery.
Operational time: 80-100 hours continuous flashing.
Daylight photocell: Automatic day/night photocell switch.
Visibility: 2-3 NM.
Max. water pressure: 600 bar.
Water pressure switch: Shut OFF warning light at 1,6 bar water pressure.
Temperature range: -40°C to +60°C
Lenght without OFF cap: 197mm.
Min. diameter: 44mm.
Max. diameter: 49mm.
Weight included battery: 0,65 Kg.

HUB200-SUN is a solar powered warning light for use on offshore buoys and floats.
This warning light have internal solar panel and battery.
The flash can be seen up to 10 km. in a clear dark night.

Diameter: 220mm
Height: 115mm
Weight: 1.75kg
Waterproof: IP68
Photocell: Yes
Flash character: Flash every 5 seconds.
Visibility: Up to 10 Km.
Flashtime: Unlimited in sunny outdoor environment. Continuous flashing without sun charging, 300 hours.

Offshore warning light special designed for use on buoys and floats with white power LED`s. The flash character is programmable for any character. Standard character is morse code U.
HUB300 can be delivered with client specified cables and connectors.
Visibility is 10 km in clear dark night. All models have photocell day/night switch.
Power consumption 8 watt.

HUB300-12
12-15VDC input

HUB300-24
24-30VDC input

HUB300-12-GPS
12-15VDC input with onboard GPS flash synchronization.

HUB300-24-GPS
24-30VDC input with onboard GPS flash synchronization.